Since my last blogposts covered many 6in4 IPv6 tunnel setups (1, 2, 3) I took a packet capture of some tunneled IPv6 sessions to get an idea how these packets look like on the wire. Feel free to download this small pcap and to have a look at it by yourself.
A couple of spontaneous challenges from the pcap round things up. ;)
Continue reading 6in4 Traffic Capture →
Yes, I know I know, the Juniper ScreenOS devices are Out-of-Everything (OoE), but I am still using them for a couple of labs. They simply work as a router and VPN gateway as well as a port-based firewall. Perfect for labs.
For some reasons I had another lab without native IPv6 Internet. Hence I used the IPv6 Tunnel Broker one more time. Quite easy with the SSGs, since HE offers a sample config. But even through the GUI it’s just a few steps:
Continue reading Juniper ScreenOS with a 6in4 Tunnel →
Of course, you should use dual-stack networks for almost everything on the Internet. Or even better: IPv6-only with DNS64/NAT64 and so on. ;) Unfortunately, still not every site has native IPv6 support. However, we can simply use the IPv6 Tunnel Broker from Hurricane Electric to overcome this time-based issue.
Well, wait… Not when using a Palo Alto Networks firewall which lacks 6in4 tunnel support. Sigh. Here’s my workaround:
Continue reading Workaround for Not Using a Palo Alto with a 6in4 Tunnel →
For some reason, I am currently using a FortiGate on a location that has no native IPv6 support. Uh, I don’t want to talk about that. ;) However, at least the FortiGate firewalls are capable of 6in4 tunnels. Hence I am using the IPv6 Tunnel Broker from Hurricane Electric again. Quite easy so far.
But note, as always: Though FortiGate supports these IPv6 features such as a 6in4 tunnel or stateful/-less DHCPv6 server, those features are NOT stable or well designed at all. I had many bugs and outages during my last years. Having “NAT enabled” on every new IPv6 policy is ridiculous. Furthermore, having independent security policies for legacy IP and IPv6 is obviously a really bad design. One single policy responsible for both Internet protocols is a MUST. Anyway, let’s look at the 6in4 tunnel:
Continue reading Using a FortiGate with a 6in4 Tunnel →
The most common transition method for IPv6 (that is: how to enable IPv6 on a network that does not have a native IPv6 connection to the Internet) is a “6in4” tunnel. Even other tunneling methods such as Teredo or SixXS are found on different literatures. However, another method that is not often explained is to tunnel the IPv6 packets through a VPN connection. For example, if the main office has a native IPv6 connection to the Internet, as well as VPN connections to its remote offices, it is easy to bring IPv6 subnets to these stations.
Here is how I did it with some Juniper SSG firewalls:
Continue reading IPv6 through IPv4 VPN Tunnel with Juniper SSGs →