This post describes how to add a Linux machine to the MRTG/Routers2 monitoring server. First, the host must be able to process SNMP requests. Then, a *.cfg file for MRTG/Routers2 is created by running the “cfgmaker” tool with a host-template. Since a few values are wrong in the cfgmaker file, I also explain how to correct them. Finally, I am adding the mrtg-ping-probe lines to the configuration.
Tag Archives: cfgmaker
MRTG/Routers2: Adding a Switch
The Multi Router Traffic Grapher (MRTG) can, of course, not only monitor routers via SNMP, but any devices that support the Simple Network Management Protocol, e.g., switches. With the tool “cfgmaker” it is quite easy to add switches with many ports to the monitoring system. However, some subsequent work is needed to have a clean configuration. This blog post presents a step-by-step guide for adding a switch into MRTG/Routers2.
MRTG/Routers2: Adding a Cisco Router
This post shortly explains the process of adding a Cisco router into the monitoring system “MRTG with Routers2” as I explained it here. It gives an example on how SNMP is activated on the router and how the *.cfg file for MRTG/Routers2 is created with the additional values for CPU and memory usage.