With Infoblox you’re almost doing everything through the WebUI on the Infoblox Grid Master. At least the daily business such as adding/changing/deleting/moving/whatever DNS, DHCP, and IPAM stuff. Even troubleshooting is almost done through this HTTPS-based GUI. However, some circumstances require the use of the CLI on an Infoblox appliance/VM, called “Remote Console Access” aka SSH. Here are the most common troubleshooting CLI commands for Infoblox DDI. Samples on how to use the IPMI/LOM features round things up:
Yes I know, ScreenOS is “End of Everything” (EoE). However, for historical reasons I am still managing many Netscreen/ScreenOS firewalls for some customers. Similar to my troubleshooting CLI commands for Palo Alto and Fortinet I am listing the most common used commands for the ScreenOS devices as a quick reference / cheat sheet. These are only the commands that are needed for deep troubleshooting sessions that cannot be done solely on the GUI.
This blog post is a list of common troubleshooting commands I am using on the FortiGate CLI. It is not complete nor very detailled, but provides the basic commands for troubleshooting network related issues that are not resolvable via the GUI. I am not focused on too many memory, process, kernel, etc. details. These must only be used if there are really specific problems. I am more focused on the general troubleshooting stuff. I am using it personally as a cheat sheet / quick reference and will update it from time to time.
When troubleshooting network and security issues on many different devices/platforms I am always missing some command options to do exactly what I want to do on the device I am currently working with. Therefore I list a few commands for the Palo Alto Networks firewalls to have a short reference / cheat sheet for myself. Maybe some other network professionals will find it useful.
However, since I am almost always using the GUI this quick reference only lists commands that are useful for the console while not present in the GUI. Continue reading CLI Commands for Troubleshooting Palo Alto Firewalls
A few days ago I needed to use vi for a simple change in a single file. However, I am not using vi in normal situations since I prefer the usage of “nano“. Since I only needed to edit a few lines, all the command references I found on the Internet were much to overwhelmed, so I decided to write a really tiny vi tutorial which only shows the commands in order to edit a file and to close it afterwards. Here we go:
Open the file with vi textfile.
Go into the edit mode with “i” and edit the text. When you are finished, hit the Esc key to leave the edit mode. Type a colon followed by an “x” (appears at the bottom line) to quit vi with saving the changes. Thats it. Here is the sequence at a glance: