As you hopefully already know, you should use at least three different NTP servers to get your time. However, there might be situations in which you can configure only one single NTP server, either via static IP addresses or via an FQDN. To overcome this single point of failure you can use an external load balancing server such as F5 LTM (in HA of course) to forward your NTP queries to one of many NTP servers. Here are some hints:
“We have two independent DSL connections to the Internet and want to share the bandwidth for our users.” This was the basic requirement for a load balancing solution at the customer’s site. After searching a while for dedicated load balancers and thinking about a Do-It-Yourself Linux router solution, I used an old Cisco router (type 2621, about 40,- € on eBay at the time of writing) with two default routes, each pointing to one of the ISP routers. That fits. ;)
Continue reading Basic ISP Load Balancing with a Cisco Router