Category Archives: MRTG/Routers2

All posts in conjunction with the monitoring system MRTG with RRDtool and Routers2.

MRTG/Routers2: Template FortiGate

Fortinet, MRTG/Routers2, Template, , , , , ,

A few weeks ago I constructed an MRTG/Routers2 template for the Fortinet FortiGate firewalls. I am using it for monitoring the FortiGate from my MRTG/Routers2 server. With the basic MRTG tool “cfgmaker” all graphs for the interfaces are generated automatically. My template is an add-on that appends graphs for CPU, memory, and disk usage, as well as connections and VPN statistics. Furthermore, it implements the ping statistics graph and a “short summary”, which only shows the system relevant graphs.

Continue reading MRTG/Routers2: Template FortiGate →

MRTG/Routers2: Template Juniper SSG

Juniper Networks, MRTG/Routers2, Template, , , , , ,

Finally, this is how I am monitoring my Juniper ScreenOS SSG firewalls with MRTG/Routers2. Beside the interfaces (that can be built with cfgmaker) I am using my template in order to monitor the CPU & memory, count of sessions & VPNs, count of different kind of attacks, etc.

Continue reading MRTG/Routers2: Template Juniper SSG →

MRTG/Routers2: Template Juniper SA/MAG

Juniper Networks, MRTG/Routers2, Pulse Secure, Template, , , , , ,

I am monitoring an (old) SA-2000 cluster of Juniper Secure Access devices with my MRTG/Routers2 system. With the JUNIPER-IVE-MIB I built the configuration file for that monitoring system. In this blog post, I show the graphs generated with MRTG/Routers2 and publish my cfg file as a template.

Continue reading MRTG/Routers2: Template Juniper SA/MAG →

MRTG/Routers2: Template Cisco ASA

Cisco ASA, MRTG/Routers2, Template, , , , ,

I constructed a MRTG/Routers2 configuration template for the Cisco ASA firewall which consists the OIDs (graphs) for the interfaces, CPU, memory, VPNs, connections, ping times, and traceroute hop counts. With only four search-and-replace changes as well as a few further specifications, the whole SNMP monitoring for that firewall is configured.

Continue reading MRTG/Routers2: Template Cisco ASA →

Stromzähler mit S0-Schnittstelle vom Raspberry Pi auswerten

DIY/Bastelarbeiten, Monitoring, MRTG/Routers2, Raspberry Pi, Tutorial/Howto, , , , , , ,

Endlich ist es soweit: Ich lese den Stromverbrauch von unserer Wohnung mit einem Raspberry Pi aus und lasse mir von meinem Monitoring Server (MRTG + Routers2) schöne Graphen malen. Hierfür verwende ich einen Stromzähler mit einer S0-Schnittstelle, welchen ich direkt in der Unterverteilung eingebaut habe. Die Impulse des “Smart Meters” wertet eine Interruptroutine am Pi aus. Der Monitoring Server wiederum fragt den Pi per SNMP ab. Viele kleine Schritte also, die ich in diesem Blogpost ausführlich erläutern möchte. Viel Spaß damit!

Continue reading Stromzähler mit S0-Schnittstelle vom Raspberry Pi auswerten →

MRTG/Routers2: Template MessPC Ethernetbox

MRTG/Routers2, Template, , , , , ,

Eine sehr praktische Variante, möglichst viele Sensoren übers Netzwerk abzufragen ohne dabei viel basteln zu müssen, ist die Ethernetbox von MessPC. Man kann sie zum Beispiel mit mehreren kombinierten Temperatur/Luftfeuchtigkeits-Sensoren bestücken. Die Auswertung erfolgt am besten über ein zentrales Monitoring-System.

Auf der Homepage von MessPC befindet sich zwar eine kleine Dokumentation für die Verwendung von MRTG, allerdings wird dort ein zusätzliches Skript vorgestellt, was dank der Verwendung von SNMP ja gar nicht nötig ist. Deswegen poste ich hier mein Template von einem MessPC mit zwei Kombisensoren für Temperatur/Luftfeuchtigkeit, welches für die Verwendung mit MRTG und Routers2 gemäß meiner Installation geeignet ist. Mit nur drei Suchen-und-Ersetzen Durchläufen hat man das Template angepasst.

Continue reading MRTG/Routers2: Template MessPC Ethernetbox →

Measuring Temperatures with PCsensor’s TEMPerHUM Sensor

DIY/Bastelarbeiten, Monitoring, MRTG/Routers2, Raspberry Pi, Template, Tutorial/Howto, , , , , , , ,

I am always interested in capturing real values via hardware devices in order to generate the appropriate graphs with my monitoring system. Of course, the outside temperature in our city was at the pole position for such a project. Therefore I ordered a few temperature/humidity sensors from PCsensor (via eBay), plugged them via USB on my Raspberry Pi (Raspbian Linux), and queried them via SNMP from my MRTG/Routers2 monitoring server. Here is the whole story:

Continue reading Measuring Temperatures with PCsensor’s TEMPerHUM Sensor →

MRTG/Routers2: Statistiken für AVM’s FRITZ!Box

FRITZ!Box, MRTG/Routers2, Network, Template, , , , ,

Natürlich wollte ich auch Statistiken von der FRITZ!Box in meiner MRTG/Routers2-basierten Monitoring Umgebung haben. Glücklicherweise habe ich ein Tool namens upnp2mrtg gefunden, welches exakt das macht, nämlich die Interface-Statistik des WAN Ports der FRITZ!Box über UPnP abzufragen und für MRTG aufzubereiten. Sehr einfach zu benutzen. Hier also eine Anleitung mit einigen zusätzlichen Hinweisen.

Continue reading MRTG/Routers2: Statistiken für AVM’s FRITZ!Box →

MRTG/Routers2: Adding a Linux Host

Linux, MRTG/Routers2, Network, Tutorial/Howto, , , , ,

This post describes how to add a Linux machine to the MRTG/Routers2 monitoring server. First, the host must be able to process SNMP requests. Then, a *.cfg file for MRTG/Routers2 is created by running the “cfgmaker” tool with a host-template. Since a few values are wrong in the cfgmaker file, I also explain how to correct them. Finally, I am adding the mrtg-ping-probe lines to the configuration.

Continue reading MRTG/Routers2: Adding a Linux Host →

MRTG/Routers2: Counting Traceroute Hops

MRTG/Routers2, Network, Template, Tutorial/Howto, , , ,

I was interested in generating graphs within the MRTG/Routers2 monitoring system that display the number of hops for an IP connection through the Internet. In my opinion its interesting to see the different routing run times/hop counts e.g. for remote offices that are connected via dynamic ISP connections such as DSL. Therefore, I wrote a small script that executes a traceroute command which can be called from MRTG.

Continue reading MRTG/Routers2: Counting Traceroute Hops →

MRTG/Routers2: Measuring Ping Times

MRTG/Routers2, Ping/Traceroute, Template, , , ,

MRTG can also evaluate values from external scripts such as the “mrtg-ping-probe” program which returns the round-trip time from the initiated ping command to the specified destination host. With an additional GraphStyle called “range” from Routers2, these ping times can be displayed in the monitoring system. This graph style shows the “min” and “max” RTT in one vertical line instead of two independent lines.

Since there is not much to say about this process, I will only paste my MRTG/Routers2 config for mrtg-ping-probe and will show a few example graphs here.

Continue reading MRTG/Routers2: Measuring Ping Times →

MRTG/Routers2: Adding a Switch

MRTG/Routers2, Network, Tutorial/Howto, , , ,

The Multi Router Traffic Grapher (MRTG) can, of course, not only monitor routers via SNMP, but any devices that support the Simple Network Management Protocol, e.g., switches. With the tool “cfgmaker” it is quite easy to add switches with many ports to the monitoring system. However, some subsequent work is needed to have a clean configuration. This blog post presents a step-by-step guide for adding a switch into MRTG/Routers2.

Continue reading MRTG/Routers2: Adding a Switch →

MRTG/Routers2: Adding a Cisco Router

Cisco Systems, MRTG/Routers2, Network, Tutorial/Howto, , , ,

This post shortly explains the process of adding a Cisco router into the monitoring system “MRTG with Routers2” as I explained it here. It gives an example on how SNMP is activated on the router and how the *.cfg file for MRTG/Routers2 is created with the additional values for CPU and memory usage.

Continue reading MRTG/Routers2: Adding a Cisco Router →

MRTG with RRDtool and Routers2 – Installation from Scratch

Linux, MRTG/Routers2, Network, Tutorial/Howto, , , , , , ,

I always wanted to monitor my private network with an open source tool. Since I knew some nice statistics, e.g. from the DE-CIX (printed with RRDtool) or from the Uni-Gießen (generated with MRTG), I had the idea of installing such a system by myself. Luckily I found a book from Steve Shipway, called “Using MRTG with RRDtool and Routers2“, which actually disappointed me because it did not offer a complete installation guide but mainly further information about fine-tuning the appropriate tools.

Therefore, I want to show a complete step-by-step installation of all the needed tools in order to monitor a network with MRTG, RRDtool and Routers2.  “From scratch” means that there are no prerequisite to this installation guide except a plain Linux server (in my case a Ubuntu Linux) such as presented here. Okay, let’s go: Continue reading MRTG with RRDtool and Routers2 – Installation from Scratch →