Yes, I know I know, the Juniper ScreenOS devices are Out-of-Everything (OoE), but I am still using them for a couple of labs. They simply work as a router and VPN gateway as well as a port-based firewall. Perfect for labs.
For some reasons I had another lab without native IPv6 Internet. Hence I used the IPv6 Tunnel Broker one more time. Quite easy with the SSGs, since HE offers a sample config. But even through the GUI it’s just a few steps:
Continue reading Juniper ScreenOS with a 6in4 Tunnel
My lab rack of 2019 consists of multiple Cisco routers and switches, as well as Juniper ScreenOS firewalls for routing purposes, a Palo Alto Networks firewall, a Juniper SRX firewall, a server for virtualization and some Raspberry Pis. That is: This rack can be used for basic Cisco courses such as CCNA or CCNP, or for even bigger BGP/OSPF or IPsec VPN scenarios since those ScreenOS firewalls are perfect routers as well. Of course, everything is IPv6 capable. Having some PoE-powered Raspberry Pis you can simulate basic client-server connections. A Juniper SA-2500 (aka Pulse Connect Secure) for remote accessing the Lab rounds things up.
I am just writing down a few thoughts on why I have “designed” the rack in that way. It’s basically a reminder for myself. ;)
Continue reading My IPv6/Routing/Cisco Lab Rack (2019)
Until now I generated all SSHFP resource records on the SSH destination server itself via
ssh-keygen -r <name>. This is quite easy when you already have an SSH connection to a standard Linux system. But when connecting to third party products such as routers, firewalls, whatever appliances, you don’t have this option. Hence I searched and found a way to generate SSHFP resource records remotely. Here we go:
Continue reading Generating SSHFP Records Remotely
And finally the throughput comparison of IPv6 and legacy IP on a Juniper ScreenOS firewall. Nobody needs this anymore since they are all gone. ;) But since I did the same speedtests for Palo Alto and FortiGates I was interested in the results here as well.
Continue reading Juniper ScreenOS IPv4 vs. IPv6 Throughput Tests
Just for fun some more VPN throughput tests, this time for the late Juniper ScreenOS firewalls. I did the same Iperf TCP tests as in my labs for Fortinet and Palo Alto, while I was using six different phase1/2 proposals = crypto algorithms. The results were as expected with one exception.
Continue reading Juniper ScreenOS VPN Speedtests
I still like the Juniper ScreenOS firewalls such as the SSG 5 or the SSG 140. However, they are End of Everything (EoE) and not used at the customers anymore. But they still do their job in basic networking (static/dynamic routing such as OSPF & BGP, IPv6, NAT), basic firewalling (access policies), and IPsec VPN. Hence I am using a couple of SSGs in my lab when playing with routing protocols and so on.
After a factory reset of those firewalls there are some default settings such as zones at a few interfaces and default IP addresses. Therefore I put the following commands together in order to cleanup the default config to have only IP addresses and default routes which is a good starting point for lab configurations. Let’s go:
Continue reading Juniper ScreenOS Initial Cleanup Config
Yes I know, ScreenOS is “End of Everything” (EoE). However, for historical reasons I am still managing many Netscreen/ScreenOS firewalls for some customers. Similar to my troubleshooting CLI commands for Palo Alto and Fortinet I am listing the most common used commands for the ScreenOS devices as a quick reference / cheat sheet. These are only the commands that are needed for deep troubleshooting sessions that cannot be done solely on the GUI.
Continue reading CLI Commands for Troubleshooting Juniper ScreenOS Firewalls
Since a few weeks I am using Tufin SecureTrack in my lab. A product which analyzes firewall policies about their usage and their changes by administrators (and much more). Therefore, the first step is to connect the firewalls to SecureTrack in two directions: SSH from SecureTrack to the device to analyze the configuration, as well as Syslog from the device to SecureTrack to real-time monitor the policy usage.
This blog post shows the adding of the following firewalls into Tufin: Cisco ASA, Fortinet FortiGate, Juniper ScreenOS, and Palo Alto PA.
Continue reading Tufin SecureTrack: Adding Devices
The Juniper ScreenOS firewall is one of the seldom firewalls that implements DHCPv6 Prefix Delegation (DHCPv6-PD). It therefore fits for testing my dual stack ISP connection from Deutsche Telekom, Germany. (Refer to this post for details about this dual stack procedure.)
It was *really* hard to get the correct configuration in place. I was not able to do this by myself at all. Also Google did not help that much. Finally, I opened a case by Juniper to help me finding the configuration error. After four weeks of the opened case, I was told which command was wrong. Now it’s working. ;) Here we go.
Continue reading Juniper ScreenOS: DHCPv6 Prefix Delegation
Similar to my test lab for OSPFv2, I am testing OSPFv3 for IPv6 with the following devices: Cisco ASA, Cisco Router, Fortinet FortiGate, Juniper SSG, Palo Alto, and Quagga Router. I am showing my lab network diagram and the configuration commands/screenshots for all devices. Furthermore, I am listing some basic troubleshooting commands. In the last section, I provide a Tcpdump/Wireshark capture of an initial OSPFv3 run.
I am not going into deep details of OSPFv3 at all. But this lab should give basic hints/examples for configuring OSPFv3 for all of the listed devices.
Continue reading OSPFv3 for IPv6 Lab: Cisco, Fortinet, Juniper, Palo Alto, Quagga
I already puslished a blog post concerning policy-based routing on a Juniper firewall within the same virtual router (VR). For some reasons, I was not able to configure PBR correctly when using multiple VRs. Now it works. ;) So, here are the required steps:
Continue reading Policy-Based Routing on ScreenOS with different Virtual Routers
The most common transition method for IPv6 (that is: how to enable IPv6 on a network that does not have a native IPv6 connection to the Internet) is a “6in4” tunnel. Even other tunneling methods such as Teredo or SixXS are found on different literatures. However, another method that is not often explained is to tunnel the IPv6 packets through a VPN connection. For example, if the main office has a native IPv6 connection to the Internet, as well as VPN connections to its remote offices, it is easy to bring IPv6 subnets to these stations.
Here is how I did it with some Juniper SSG firewalls:
Continue reading IPv6 through IPv4 VPN Tunnel with Juniper SSGs
Since IPv6 gets more and more important, I am using it by default on all my test firewalls, which of course support IPv6. However, when comparing the different functions and administration capabilities, they vary significantly.
Here comes my short evaluation of the IPv6 functions on the following four firewalls: Cisco ASA, Fortinet FortiGate, Juniper SSG, and Palo Alto.
Continue reading Firewall IPv6 Capabilities: Cisco, Forti, Juniper, Palo
Here comes the step-by-step guide for building a site-to-site VPN between a FortiGate and a ScreenOS firewall. Not much to say. I am publishing several screenshots and CLI listings of both firewalls, along with an overview of my laboratory.
Continue reading IPsec Site-to-Site VPN FortiGate <-> Juniper SSG
MIP DIP VIP. I am sometimes confused with the NAT names of the Juniper ScreenOS devices. Therefore, I drew a small figure with a few basic examples for these NAT types.
Continue reading Juniper ScreenOS NAT Overview: MIP DIP VIP