Tag Archives: Prefix Delegation

Juniper ScreenOS: DHCPv6 Prefix Delegation

The Juniper ScreenOS firewall is one of the seldom firewalls that implements DHCPv6 Prefix Delegation (DHCPv6-PD). It therefore fits for testing my dual stack ISP connection from Deutsche Telekom, Germany. (Refer to this post for details about this dual stack procedure.)

It was *really* hard to get the correct configuration in place. I was not able to do this by myself at all. Also Google did not help that much. Finally, I opened a case by Juniper to help me finding the configuration error. After four weeks of the opened case, I was told which command was wrong. Now it’s working. ;) Here we go.

Continue reading Juniper ScreenOS: DHCPv6 Prefix Delegation

Telekom Dual-Stack Verbindungsaufbau

Bis neulich hatte ich einen normalen DSL-Anschluss von 1&1: Per PPPoE eingewählt und eine IPv4-Adresse bekommen – fertig. Das kann neben der FRITZ!Box natürlich auch jeder vernünftige Router oder Firewall.

Jetzt habe ich endlich einen richtigen Dual-Stack (IPv4 und IPv6) Anschluss der Telekom (Glasfaser “MagentaZuhause M” ohne Fernsehen, siehe hier). Juchu! ;) Bevor ich jedoch den mitgelieferten Speedport durch diverse andere Testgeräte ersetze, wollte ich mal vernünftig mitschneiden, welche Protokolle denn bei einem Verbindungsaufbau genau eingesetzt werden. Vor allem die Prefix Delegation über DHCPv6 interessierte mich…

Continue reading Telekom Dual-Stack Verbindungsaufbau