Now that you have your own NTP servers up and running (such as some Raspberry Pis with external DCF77 or GPS times sources) you should monitor them appropriately, that is: at least their offset, jitter, and reach. From an operational/security perspective it is always good to have some historical graphs that show how any service behaves under normal circumstances to easily get an idea about a problem in case one occurs. With this post I am showing how to monitor your NTP servers for offset, jitter, reach, and traffic aka “NTP packets sent/received”.
In this tutorial I will show how to set up a Raspberry Pi with a DCF77 receiver as an NTP server. Since the external radio clock via DCF77 is a stratum 0 source, the NTP server itself is stratum 1. I am showing how to connect the DCF77 module and I am listing all relevant commands as a step by step guide to install the NTP things. With this tutorial you will be able to operate your own stratum 1 NTP server. Nice DIY project. ;) However, keep in mind that you should only use it on a private playground and not on an enterprise network that should consist of high reliable NTP servers rather than DIY Raspberry Pis. Anyway, let’s go: